欧美 国产 日产 韩国

    <th id="oiyjt"></th>

  1. <dd id="oiyjt"></dd><rp id="oiyjt"></rp>
    1. <em id="oiyjt"></em>

      <dd id="oiyjt"></dd>

      • Concrete Foam Block Machine

      Concrete Foam Block Machine

      We provide complete production line ?for light weight CLC block and how to run the plant. Process-lightweight Concrete Block are produced by adding foam air bubbles into a fly ash-cement mixture. Foam Generator will use to create millions of air bubbles from foam chemical. The foam is mixed in proportion with cement Flyash/light weight waste material and water.The Different grades manufacutured on basis of strength, thermal conductivity, density and durability grades.


      We provide complete production line ?for light weight CLC block and how to run the plant.Process-lightweight Concrete Block are produced by adding foam air bubbles into a fly ash-cement mixture. Foam Generator will use to create millions of air bubbles from foam chemical. The foam is mixed in proportion with cement Flyash/light weight waste material and water.The Different grades manufacutured on basis of strength, thermal conductivity, density and durability grades.
      The various grades manufactured depends on Density of material:
      Density Ranges:300-800 kg/m3
      Density Ranges:1000-1200 kg/m3
      Density Ranges:1200-1800 kg/m3
      ?
      Different sizes popular in CLC Blocks are:
      600MM x200MM x100MM: weight approx 10kg
      600MM x200MM x150MM: weight approx 15kg
      600MM x200MM x200MM: weight approx 20kg
      600MM x200MM x225MM: weight approx 25kg
      ?
      Concrete Foam Block Machine have designed and developed for more than two years.
      It is dual-use machine for the production of ceramic reinforced AAC Block without autoclave,
      warm insulation foam concrete blocks, wall insulation panels, and fire-proof door circuit board, etc.
      Raw material is fly ash, lime and industrial wastes, easy obtained and low cost. Small investment, 20%-30% cost of AAC block production line.
      ?
      Raw Material:
      Protein base chemical
      Fly ash
      Cement?
      Water
      Fine sand
      Air?
      Production Procedure:
      1.Batching, foaming, mixing system and molding
      Automatic weighing system for water,cement,foam agent and additive and concrete
      Foaming foam agent by foam machine
      Automatic mixing material
      Pouring and Molding in the mould
      2.Mould conveying and moving
      Ferry Vehicle:transport for carrying and conveying block mould and bottom plate
      Moving rail for ferry vehicle moving
      3.Demould and Cutting
      Automatically seperate the block from mould
      cutting the complete block into three pieces by cutting machine
      tilter change the block cutting direction for second cutting
      second cutting machine for small pieces.?

      We provide complete production line ?for light weight CLC block and how to run the plant. Process-lightweight Concrete Block are produced by adding foam air bubbles into a fly ash-cement mixture. Foam Generator will use to create millions of air bubbles from foam chemical. The foam is mixed in proportion with cement Flyash/light weight waste material and water.The Different grades manufacutured on basis of strength, thermal conductivity, density and durability grades.

      ?

      The various grades manufactured depends on Density of material:

      Density Ranges:300-800 kg/m3

      Density Ranges:1000-1200 kg/m3

      Density Ranges:1200-1800 kg/m3

      ?

      Different sizes popular in CLC Blocks are:

      600MM x200MM x100MM: weight approx 10kg

      600MM x200MM x150MM: weight approx 15kg

      600MM x200MM x200MM: weight approx 20kg

      600MM x200MM x225MM: weight approx 25kg

      ?

      Concrete Foam Block Machine have designed and developed for more than two years.

      It is dual-use machine for the production of ceramic reinforced AAC Block without autoclave,

      warm insulation foam concrete blocks, wall insulation panels, and fire-proof door circuit board, etc.

      Raw material is fly ash, lime and industrial wastes, easy obtained and low cost. Small investment, 20%-30% cost of AAC block production line.

      Raw Material:

      Protein base chemical

      Fly ash

      Cement?

      Water

      Fine sand

      Air?

      Production Procedure:

      1.Batching, foaming, mixing system and molding

      Automatic weighing system for water,cement,foam agent and additive and concrete

      Foaming foam agent by foam machine

      Automatic mixing material

      Pouring and Molding in the mould

      2.Mould conveying and moving

      Ferry Vehicle:transport for carrying and conveying block mould and bottom plate

      Moving rail for ferry vehicle moving

      3.Demould and Cutting

      Automatically seperate the block from mould

      cutting the complete block into three pieces by cutting machine

      tilter change the block cutting direction for second cutting

      second cutting machine for small pieces.

      ?

      ?

      ?

      ?

      ?

      ?

      ?

      ?

      In the same category

      欧美 国产 日产 韩国

        <th id="oiyjt"></th>

      1. <dd id="oiyjt"></dd><rp id="oiyjt"></rp>
        1. <em id="oiyjt"></em>

          <dd id="oiyjt"></dd>